HOST CONFIGURATION STRINGS
CODE SELECTION (continued)
Codabar disable Codabar family
no start/stop character equality control
nor transmission
no start/stop character equality control
AD112
start/stop character equality control
but no transmission
start/stop character equality control
and transmission
no start/stop character equality control
but transmission
Codabar ABC forced concatenation
start/stop character case in transmission
enable Code 128 - control without transmission of check digit
enable EAN 128 - control without transmission of check digit
Transmit GS before
Code
disable
enable
ISBT 128 enable ISBT 128
enable Code 93 - control without transmission of check digit
MOD11-MOD10 no tx
MOD11-MOD10 with tx
MOD10-MOD10 no tx
xxxx = ASCII numbers that define the code length where:
• First 2 digits = minimum acceptable code length.
• Second 2 digits = maximum acceptable code length.
The minimum code length must always be less than or equal to the maximum.
The maximum code length for all codes is 99 characters:
EXAMPLES:
0132 = variable length from 1 to 32 digits in the code.
1010 = 10 digit code length only.
To Next Page
Loading...
Need help?
General
