Systems Manual 49
RF Beeper
Frequency
This setting affects the frequency at which the ACK beep is sounded,
and is independent of the frequency setting for the good read beep.
When the ACK beep is sounded at a different frequency than the good
read beep, this can provide a clearer distinction between the tones.
Select low frequency (760Hz), medium frequency (1250Hz), or high fre-
quency (2400Hz).
Feature is specific to scanner ONLY
SET -------------------------------------------
RF Beeper Low Frequency
RF Beeper Medium Frequency
RF Beeper High Frequency
END ------------------------------------------
To Next Page
Loading...
Need help?
General
