Datalogic QuickScan QBT2400 Quick Reference Guide

Linking the Reader
Quick Reference Guide 13
Variable PIN Code
Some Bluetooth drivers on the Host (such as WIDCOMM
and BlueSoleil 8) require a Variable PIN Code. When
attempting connection, the application presents a window
that includes a PIN Code which is to be input using the
QBT2400. Please read the bar code "Variable PIN Code"
and restart the sequence from step 2 above.
When you hear the beep and see the Green LED blinking
indicating the reader is waiting for an alphanumeric entry,
enter the required variable PIN Code by scanning the cor-
responding bar codes in the “Hex-Numeric Keypad” sec-
tion at the back of this manual for alphanumeric entry.
Finish by scanning the
Exit HID Variable PIN Code label.
Exit HID Variable PIN Code
HID Country Mode
When the Reader is connected with a Bluetooth Adapter
in HID mode, you may want to set the country for which
your PC is localized. Go to "Country Mode" on page 16” and
read one of the configuration command labels.
HID Caps Lock State
This option specifies the format in which the reader send-
character data. See "Caps Lock State" on page 20 for program-
ming labels.
$P,CBTHP01,P\r
Variable PIN Code

Datalogic QuickScan QBT2400 Specifications

General

Connectivity	Bluetooth
Battery Type	Lithium-Ion
Battery Capacity	1400 mAh
IP Rating	IP42
Print Contrast Ratio (Minimum)	25%
Interfaces Supported	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Drop Resistance	Withstands drops from 1.5 m / 5.0 ft
Radio Range (Open Air)	100 m
Type	Handheld
Scan Rate	60 frames per second
Resolution	0.1 mm
Humidity	5 to 95% non-condensing
Light Source	Red LED
Supported Barcodes	1D / 2D and postal codes