Datalogic QuickScan QBT2400 Quick Reference Guide

Caps Lock State
20 QuickScan™ QBT2400
Caps Lock State
This option specifies the format in which the reader sends
character data.
When using the Base Interface, this applies only to keyboard
wedge interfaces. It does not apply when an alternate key
encoding keyboard is selected.
NOTE
The following bar codes can be used either
while in HID mode (when reader is connected
using Bluetooth) or for configuring the base.
CAPS LOCK STATE
ENTER/EXIT PROGRAMMING MODE
Caps Lock State = Caps Lock OFF
Caps Lock State = Caps Lock ON
Caps Lock State = AUTO Caps Lock Enable

Datalogic QuickScan QBT2400 Specifications

General

Connectivity	Bluetooth
Battery Type	Lithium-Ion
Battery Capacity	1400 mAh
IP Rating	IP42
Print Contrast Ratio (Minimum)	25%
Interfaces Supported	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Drop Resistance	Withstands drops from 1.5 m / 5.0 ft
Radio Range (Open Air)	100 m
Type	Handheld
Scan Rate	60 frames per second
Resolution	0.1 mm
Humidity	5 to 95% non-condensing
Light Source	Red LED
Supported Barcodes	1D / 2D and postal codes