Dataprobe RSS-16 User Manual

RSS_v180808n RSS Series Page 17
get powersupply
Get the current state of the power supplies
RSS-16> get powersupplies
Power Supply 1: Fail
Power Supply 2: Ok
Ok
RSS-16>
get upgrade enable
set upgrade enable <yes|no>
Set firmware upgrade enable flag
no
get mac
set mac <XX:XX:XX:XX:XX:XX>
Set network MAC address
get network
Get network IP settings
RSS-16> get network
IP Mode: Static
IP Address: 10.10.10.70
Subnet: 255.255.255.0
Gateway: 10.10.10.7
DNS1: 0.0.0.0
DNS2: 0.0.0.0
Ok
RSS-16>
set ipmode <static|dhcp>
Sets the IP Mode
Static: The IP address is set manually
DHCP: The IP Address is set by DHCP Server
static
set ipaddress <xxx.xxx.xxx.xxx>
Sets the IP Address in dotted decimal
192.168.1.254
set subnet <xxx.xxx.xxx.xxx>
Sets the subnet mask in dotted decimal
255.255.255.0
set gateway <xxx.xxx.xxx.xxx>
Sets the gateway in dotted decimal
0.0.0.0
set dns1 <xxx.xxx.xxx.xxx>
Set network DNS server 1 IP address
0.0.0.0
set dns2 <xxx.xxx.xxx.xxx>
Set network DNS server 2 IP address
0.0.0.0

Dataprobe RSS-16 Specifications

General

Brand	Dataprobe
Model	RSS-16
Category	Switch
Language	English