RSS_v180808n RSS Series Page 29
5.3. Setup Page
The setup page consists of several sections. Each time a setting is changed click on the Apply button for that
section to save the changes in IPC-1-R.
Device
Set the name that displays on the top of the Home Page as well as
the Status Name for the A and B switch positions.
Set the IP address, IP acquisition mode, Port Settings and SSL
Set the IPC-1-R for automatic operation based on device availability
Set up to 4 SNMP managers and what events generate Traps
Set username and passwords for the Administrator and User
Set email notification and what events generate emails
Load new or custom firmware in the IPC-1-R
To Next Page
Loading...
