Need help?Do you have a question about the Datcon DT9502 and is the answer not in the manual?
General| Brand | Datcon |
|---|---|
| Model | DT9502 |
| Category | Measuring Instruments |
| Language | English |
Overview of the device's purpose and capabilities.
Explanation of icons and symbols used in the manual.
Specifies who is qualified to operate and maintain the instrument.
Defines the intended applications and limitations of the DT9502.
Outlines general safety regulations and guidelines for using the instrument.
Specific safety instructions for operating in potentially explosive environments.
Explains how the temperature meter and transmitter functions.
Details the default factory settings for the instrument's operation.
Provides guidance for proper installation and panel mounting.
Displays the physical dimensions for installation planning.
Step-by-step instructions for physically installing the instrument.
Instructions for wiring the instrument into the signal loop.
Guide to initial power-on and basic operation of the display.
Explains the various codes and characters shown on the LCD screen.
Details the function of each push-button on the front panel.
Procedure for entering user or supervisor codes to access settings.
Overview of the instrument's menu structure and navigation.
Configuration of the two limit outputs based on measured values.
Selection of input connection mode for Pt100 sensors.
Setting the temperature corresponding to the 4 mA output signal.
Setting the temperature corresponding to the 20 mA output signal.
Procedure to set a new code for user-level access.
Procedure to set a new code for supervisor-level access.
Configuration for the display format (e.g., 4.5 or 3.5 digits).
Restores all parameters to their original factory default values.
Guidance on identifying and diagnosing instrument errors.
Instructions and safety precautions for instrument repair.
Steps for safely removing the instrument from its installation.
Guidelines for the environmentally responsible disposal of the instrument.
Detailed technical data and parameters of the DT9502.
Practical illustration of how to connect and use the instrument.
List and explanation of standard error codes displayed by the instrument.
Details critical error messages that may indicate hardware failure.
Provides a comprehensive explanation of each menu item and its function.
Step-by-step guide for configuring specific settings through an example.
In-depth explanation and examples of limit output functionality.
Documentation regarding the instrument's certification for use in hazardous areas.
To Next Page