Datcon DT9502 - Display Characters and Mnemonics

DT9502
20 20171205-V3
6.2. Characters and mnemonics appearing on the
display
DT9502 has a 7-segment type display. It means that
maximum 7 bars are used to form each characters. The
numbers can be read easily, some of the letters, marks
however, looks unusual:
 = A,  = B,  = C,  = D,  = E,  = F,  = G,
 = H, = I,  = J,  = K,  = L,  = M,  = N,
 = O,  = P,  = Q,  = R,  = S,  = T,  = U,
 = V,  = W,  = X,  = Y,  = Z
All mnemonics (code words) presented on the display
comes from English expressions in abbreviated form.
The following part gives a list of the possible mnemonics
and their meaning. The left-side column shows the
characters appearing on the display. The right-side column
gives first the meaning, then the full English word in
brackets and, after the hyphen, and explanation may be
given.
Login text

DT - Datcon instrument

9502 - Type of the instrument

The device is preparing for the measurement
Error messages

A/D overflow (Error: AD Overflow)

Measurement missing (Error: MeaSuremenT)

Underflow (Error: Underflow)

Overflow (Error: Overflow)

Missing Minimum-Maximum (Error: Missing Minimum-
Maximum)

Measurement (Error: MeaSuremenT)