DT9502
20171205-V3
41
Exit from the menu item 1. After you have completed the setting, press the MENU
button. With this you leave the menu itemt, and you see
this:
.
(2. If you want to change the setting you have just
completed, or if you just want to check what you have
written in, go on with the operations from point 3 of the
Sequence of operations.)
(3. If you do not want to exit the menu as you want to do
other settings too, you may use the ▲ button to select the
desired menu items.)
Exit from the menu
Press the MENU button. First you see the script
(Save) and then the script
(Exit). With this the
saving of the settings is ready. The apparatus has left the
menu and goes on with the measurement.
To Next Page
Loading...