DT9502
20171205-V3
63
Output parameters
Transmitter output
Output signal: 4-20 mA
Overdriving: min: ~3.9 mA; max.: ~21 mA
Accuracy: 0.02% (Ta=23 °C ±2/°C
a kijelzett értékre vonatkoztatva:
Limit outputs
Output type: optically isolated passive switching transistor
Current in OFF condition: I < 0.1mA (at 9 V)
Voltage in ON condition: U < 1 V (at 10 mA)
Load rating: 10 V, 16 mA max. (Ex safety data)
Refreshing time: same as the display’s one
Hysteresis: 0 - ±99.9
Environmental conditions: Environmental conditions:
Operating temperature range: -20 – +60 °C
Storing temperature range: -20 – +70 °C
Relativ humidity: 90% max., non-condensing
Place of installation: Zone „1”, Zone „2”, safe area
Electromagnetic compatibility (EMC)
In accordance with MSZ EN 61326-1:2013
Immunity: Industrial area
Noise emission: Group 1, Class B
General data:
Design: DIN standard ABS case
Dimensions: 144 x 72 x 75 mm (width x height x depth)
Weight:
0.4 kg
Protection from front cover: IP 65
Protection from back side: IP 30
Mounting position: optional
Connection cable: 0.25-1.5 mm
2
cross-section
Electrical connection: push-in direct connection
The manufacturer reserves the right to change specifications.
To Next Page
Loading...