Datcon DT9502 - Page 78

DT9502
78 20171205-V3
Detailed description of the limit value operating modes

•: Switched OFF [this is the default factory setting]
Independent of the measured temperature, the limit output
is always switched OFF.
• : It switches ON, when: measured temperature ≥
low limit

The output switches ON, if the displayed temperature ≥
numerical value defined as the
.
In this operating mode the value of the
 parameter is
indifferent: it does not influence the operation of the output.
Example for the application:
Switching a cooling system ON above a given temperature
value.