BLUEPAD-50 PLUS MSR USER GUIDE
UM 07.01.36/v1.3.0 1 DATECS Page 15 of 25
INFO HARDWARE
Gives information about the status of the following hardware properties:
BATT: indicates the voltage of the battery
VBUS: indicates if external power supply is plugged in
CHARGE: indicates if the battery is charging
INFO KEYS
Shows the version of the following keys:
AIK keys version
TEST DISPLAY
Performs a display test. Initially a blank screen is displayed. When OK button is pressed once,
completely black screen is displayed. When OK button is pressed twice, checkmate background is
displayed, its contrast can be changed with the UP and DOWN buttons.
To exit the test at any time the button C has to be pressed.
TEST KEYBOARD
Performs a keyboard test. At first the symbols of all the keys appear on the display. Pressing a key
makes its corresponding symbol to disappear. The test ends when all the buttons have been pressed.
TEST MSR
Performs magnetic card reading test. The test waits for a card to be inserted. On a successful card
reading, the tracks data are displayed.
TEST SCR
Performs smart card reading tests. On the display appears a menu with the supported options. To
perform a test, insert a card in the card slot and select the corresponding menu option:
1: RESET : performs card reset and returns the ATR
2: GET CHALLENGE : calls the command GET CHALLENGE and returns a random number
KEYS DOWNLOAD
To download the Acquirer Initial Keys (AIK) the PINPAD has to be set in Keys Download Mode, in
which it exchanges information in a secure way through the USB interface using proprietary
communication protocol. To exit the mode the “C” button has to be pressed.
CLEAR DEA KEYS
Deletes the customer’s DEA key hierarchy.
EXIT
Exit the service menu forwarding the control to the application.
To Next Page
Loading...
