BLUEPAD-50 PLUS MSR USER GUIDE
UM 07.01.36/v1.3.0 1 DATECS Page 19 of 25
Update Firmware and Application with using Firmware API
Loaded Firmware and Application on BluePad-50 Plus can be updated via Application which is using
Firmware API. Pair BluePad-50 Plus to another device via External Interfaces (Please refer to device
specification section “Connectivity”). Run the Application* on COTS (smart device) and press “Update
device firmware”.
Figure 5
* In order to use the BluePad-50 Plus functions with COTS(smart device), special software must be
used. Please contact your distributor in order to get the latest demo application and SDK.
To Next Page
Loading...
