BLUEPAD-50 PLUS MSR USER GUIDE
UM 07.01.36/v1.3.0 1 DATECS Page 24 of 25
Check Smart Card Reader
• Perform a test transaction using several different smart cards to ensure the problem is not a
defective card.
• Ensure that the card is inserted correctly (see Smart Card Reader Use).
• If the problem persists, contact your local Datecs representative.
Due to risk of shock or damage, do not use the BluePad-50 Plus unit near water, including a
bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming
pool.
Maintenance and Cleaning
BluePad-50 Plus units have no user-serviceable parts.
To clean the unit, use a clean cloth slightly dampened with water and a drop or two of mild soap. For
stubborn stains, use alcohol or an alcohol-based cleaner.
Do not attempt to clean the card readers. Doing so can void any warranty. For card reader service,
contact your Datecs distributor or service provider.
Never use thinner, trichloroethylene, or ketone-based solvents – they can deteriorate plastic
or rubber parts. Do not spray cleaners or other solutions directly onto the keypad or display.
Main battery replacement
To replace the main battery of BluePad-50 Plus please contact with your your local Datecs
representative or service provider.
Safety
• To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp, or
dirty environments or near magnetic fields.
• Using an unapproved or incompatible power adapter, charger, or battery may damage your device,
shorten its lifespan, or cause a fire, explosion, or other hazards.
• Keep the device and battery away from excessive heat and direct sunlight. Do not place them on or
in heating devices, such as microwave ovens, stoves, or radiators.
• Dispose the battery, and accessories according to local regulations. They should not be disposed of
in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.
• Do not use, store or transport the device where flammables or explosives are stored (in a gas
station, oil depot, or chemical plant, for example). Using your device in these environments increases
To Next Page
Loading...
