Datecs DP-50 - KEY FUNCTIONS IN REGISTERING MODE; PAYMENT TYPES AND ALTERNATIVE CURRENCY

DP-50 / DP-50D / MP55-B - USERS MANUAL
When a number is entered and than the PLC key is pressed will cause:
- Sale of an item which has PLC code equal to the number entered -if the
field 5 of table 1 is 0;
- Printing the number entered - if field 5 of table 1 is 1.
VD
1. With this key immediately after an item is accumulated a VOID (cancellation) of
that sale is performed. The consecutively pressing of that key will cause
consecutively cancellation of all sales in the receipt.
2. In order to cancel a sale which is not the last made(deep void), in an open receipt
the following keys should be consecutively pressed:
Q’ty
- for DP-50 and DP-50D
X
- for MP-55B
and
VD
,
than the sale parameters should be entered again. This operation can not be
performed, if the sale parameters are not the same as in the sale to be cancelled.
Note: The operator should enter the same parameters as they are printed in the
receipt on the row which he want to cancel. If there are surcharges/discharges made
over the item, they will be cancelled together with the sale cancellation.
C
Annuls all digits entered before a functional key pressing. Annuls any error, caused
by function key pressing. The errors are presented on the display by the error
message "C".
STL
- If this key is pressed after a sale made, this will cause the subtotal of the
customers bill to be shown on the display. If this key is pressed again, on the display
will be shown the subtotal, calculated in alternative currency if the usage of this
currency is enabled. These two modes are switched alternately.
- After pressing that key after entering a PLC - code of an item, on the display
will be shown PLU-code, price and the firs 16 symbols of the item name.
ТОТАL
Cause the customer bill to be closed and cause cash payment to be
performed. If before pressing this key is entered the amount which the customer has
paid in a cash, they are printed both the total amount and the change - if the
customer has paid in cash more money than needed. If he paid in cash less money
than needed - a partial paid is performed.
CRD
- for DP-50 and DP-50D
PY
- for MP-55B
Main purpose:
The key is used for 3 types of payment.
- with cheque
- with coupon
- with alternative currency in DP-50 / DP-50D, if the usage of alternative
currency is enabled.
First is entered the amount, which the customer gave. The key CRD is pressed. A
dialog message appears:
1=CHK 2=KUP 3=EU
where
25