. . . . . . . . . . . . . . . . . . . .
DPP-250 User Manual Page 17
Setting Memory Switch
♦ MEMORY SWITCH SETTINGS:
Step #1: Make sure the printer is OFF (ERR LED is OFF) before
performing step #2.
Step #2: Press and hold the power (LF) button. The ERR LED
flashes red / green every second.
Step #3: Release the (ON) button in about 6 sec. and wait
for the printer to print out the current memory settings.
Follow the printer instructions to make the
necessary changes.
The pressing LF (YES) – confirms changes.
The pressing ON/OFF (No) – cancels changes.
Note: Care must be taken when changing factory preset
configuration information.
To Next Page
Loading...
