Datecs DPP-250 - Communication Configuration

. . . . . . . . . . . . . . . . . . . .
DPP-250 User Manual Page 20
Communication Configuration
The following default configurations are used for the different
communication methods.
♦ Communication with PDA device
♦ Via Bluetooth/ USB/ Serial:
Memory Switch Options
Memory Switch ( 1 thru 10 )
(see page 16, 17, 18)
*******010
Physical Switch Options
DIP Switch (1, 2, 3 ,4) (see page 14) *, OFF, OFF, ON
Table 8
♦ Communication with PC (using windows printer driver)
♦ Via Bluetooth/ USB/ Serial:
Memory Switch Options
Memory Switch (1 thru 10)
(see page 16, 17, 18)
*******011
Physical Switch Options
DIP Switch (1, 2, 3 ,4) (see page 14) *, OFF, OFF, OFF
Table 9
♦ Service mode (changing printer settings, loading firmware)
communication with PC
♦ Via Serial
Memory Switch Options
Memory Switch ( 1 thru 10 )
(see page 16, 17, 18)
*******011
Physical Switch Options
DIP Switch (1, 2, 3 ,4) (see page 14) *, OFF, *, ON
Table 10
* - depending on user requirements can be 1 or 0
Notes: When not using Driver/SDK developer tools, set DIP Switch 4
to OFF.