Datecs DPP-250 - Getting Started

. . . . . . . . . . . . . . . . . . . .
DPP-250 User Manual Page 7
Getting Started
The DPP-250 allows you to printer information from your PDA &
Smartphone. Before using the DPP-250 thermal printer the battery
should be properly charged. The following Quick Start guide will
help to get your DPP-250 ready for use.
Quick Start:
Steps What to do Purpose
Where to find more
information
1
Charge the
DPP-250
rechargeable
battery pack as
recommended in
this manual
The Lithium Ion
battery pack
should be fully
charged before
use to ensure
long battery life.
Charging Battery, Page 9
2
Load DPP-250
print media
(Thermal Paper)
DPP-250 requires
Thermal paper for
printing.
Loading Paper, Page 11
3
Setup Bluetooth
Pairing
Setup Bluetooth
®
pairing to allow
DPP-250 to
communicate with
Bluetooth
®
devices.
Bluetooth
®
Setup, Page 22
4
Install DPP-250
Software
To print
information from
your device,
software needs to
be installed onto
your device.
Printing software is not
provided by Datecs.
Please contact your
DPP-250 reseller for
recommendations on
Third-Party solutions.
Developers should refer to
the section in this manual
on “Developing Solutions”.
Table 3