9DayClocks
3.4 Connecting the DayClock
Connect the tablet using the adapter and micro USB cable:
1. Insert the cable adapter into the power socket.
2. Connect the small connector to your DayClock by making sure it is pressed
completely against the casing.
3. Place the tablet on the accompanying stand.
Tip
We recommend leaving the DayClock always connected to the adapter.
If you need to move the DayClock, bear in mind a battery life of three
hours.
3.5 Requesting a subscription
Before preparing your DayClock to receive activities, messages and photos, make
sure you have requested an account for your free subscription. This can be done by
sending an e-mail to info@dayclocks.eu. Make sure your e-mail contains the
following information:
• the type of DayClock (7 or 10)
• the date on which you purchased the DayClock
• the supplier where you purchased the DayClock
To Next Page
Loading...