To Next PageTo Next Page
Need help?Do you have a question about the Daystate TYPE-2 and is the answer not in the manual?
General| Brand | Daystate |
|---|---|
| Model | TYPE-2 |
| Category | Air Compressor |
| Language | English |
Provides essential details about the manual and compressor model.
Emphasizes the need for careful reading and operator qualification.
Explains safety symbols and provides essential user information.
Introduces the manual's purpose and importance for safe operation.
Details the warranty terms, conditions, and exclusions.
Outlines support services for routine and unscheduled maintenance.
Clarifies manufacturer's liability and user obligations.
Specifies the compressor's designed purpose and limitations.
Details suitable operating environments and conditions.
Guides on initial operation, break-in period, and torque values.
Provides a general description of the high-pressure compressor.
Explains how to identify the compressor via its label.
Covers essential manual reading and handling precautions.
Outlines fundamental safety guidelines for compressor operation.
Defines hazardous zones, exposed persons, and operators.
Shows the location of various safety information labels on the compressor.
Covers general safety rules for maintenance and fire prevention.
Outlines precautions for using tools, personnel, and keeping the compressor clean.
Details specific technical features of compressor components.
Lists and identifies all main parts of the compressor with a diagram.
Presents key technical specifications for different compressor models.
Illustrates the pressure circuit with numbered components.
Provides the electrical schematic and connection details.
Guides on how to safely unpack the compressor from its packaging.
Provides instructions for lifting and moving the compressor safely.
Covers general installation requirements and safety precautions.
Details requirements for compressor placement, ventilation, and lighting.
Explains how to connect an air intake extension for proper ventilation.
Guides on safely connecting the compressor to the power supply.
Lists essential checks before initial compressor operation.
Outlines daily checks for leaks and component integrity.
Covers checks for bottle condition and safety valve verification.
Provides procedures for starting and stopping the compressor.
Outlines safe procedures for refilling air tanks, including connector types.
Emphasizes following manual instructions for optimal performance and longevity.
Stresses the importance of cleanliness and careful manual adherence.
Covers repairs and component replacements needed after extended use.
Provides a comprehensive table of recommended maintenance tasks and intervals.
Lists common problems, their causes, and recommended solutions.
Guides on checking and changing the lubricating oil, including oil selection.
Provides instructions for safely checking and refilling fuel.
Guides on replacing the air intake filter cartridge.
Details the procedure for testing the safety valve's functionality.
Explains how to safely drain condensate from the separator.
Covers checking belt tension and replacement frequency.
Explains filter replacement intervals based on environmental factors.
Guides on periodically replacing hoses due to wear or damage.
Advises on cleaning and storing the compressor for brief periods.
Details procedures for storing the compressor for extended periods.
Explains how to dispose of special waste, including filters and oils, according to regulations.
Outlines procedures for safely dismantling and demolishing the compressor.
Describes the DAYSTATE customer assistance network and qualified technicians.
Explains the importance of the scheduled maintenance program.
Advises on increased maintenance frequency for difficult operating environments.
Introduces the company's support and coordination center for assistance.
Provides a log for recording maintenance activities and service details.
