EasyManua.ls Logo

dB Technologies K5 - Power Supply Section

dB Technologies K5
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
DVA K5 Code 420120232 REV.1.1
English
ATTENTION!
POWER SUPPLY SECTION
7. “AUTO-RANGE MAINS INPUT” POWER SUPPLY INPUT
Power supply input for cable equipped with NEUTRIK® powerCON® connector.
8. “MAINS LINK” POWER SUPPLY LINKING OUTPUT
Output allowing to extend the power supply to a second module through a
cable equipped with a NEUTRIK
® powerCON connector.
9. “MAINS FUSE” PROTECTION FUSE
Mains fuse
Only use cables equipped with high-quality genuine Neutrik® connectors.
Never use the speaker for a prolonged time while the limiter LED is on or blinking, indicating
the equipment is running under excessive stress conditions
The speaker is supplied with a mounted fuse
for operation within the 220-240V~ range.
If you need to operate in the 100-120V~
voltage range:
1. Disconnect all connections,
including the power supply.
2. Wait 5 minutes.
3. Replace the fuse with the one
provided in the package for the 100-
120V~ range.

Table of Contents

Related product manuals