DCS Elgar Plus - Mains Supply Voltage; Having Your Options Changed; Table 9 - Options Available

dCS Elgar Plus User Manual Manual for Software Issue 4.3x
dCS Ltd August 2005
Manual filename: Elgar Manual v4.4x.doc Page 56 email: more@dcsltd.co.uk
English version web-site: www.dcsltd.co.uk
OPTIONS
The following options may be fitted to new units or retrofitted at a later date.
Option code Option
V5 Mains voltage set to 230/240V
V4 Mains voltage set to 215/220V
V3 Mains voltage set to 200V
V2 Mains voltage set to 115/120V
V1 Mains voltage set to 100V
Table 9 – Options available
Mains Supply Voltage
Any unit may be set for operation from 230/240V, 220V, 200V, 115/120V or
100V A.C. Units are shipped set for the mains supply voltage according to the
destination. The voltage setting can be updated later by your dealer, if
necessary. Specify the new country of use or the new voltage setting.
Having Your Options Changed
dCS support modifications, updates and option changes to supplied units. Major
changes are normally carried out at dCS as we have extensive test facilities and
can verify the changes. Please contact your dealer or dCS for details.
IMPORTANT! Please do not attempt the changes yourself. The unit’s performance or
reliability may be impaired and the warranty will be invalidated.