dCS Elgar Plus User Manual Manual for Software Issue 4.3x
dCS Ltd August 2005
Manual filename: Elgar Manual v4.4x.doc Page 62 email: more@dcsltd.co.uk
English version web-site: www.dcsltd.co.uk
Safety and Electrical Safety
There are no user serviceable parts inside Elgar Plus and so there is no need to
remove the covers. If for some reason you do:
IMPORTANT! Disconnect the power cable before removing any covers or changing the
fuse.
There are no substances hazardous to health inside Elgar Plus.
Cleaning the Case
Do not apply any of the following cleaning products to the case as they will
damage or alter the finish:
• Corrosive or abrasive agents
• Spirit or alcohol based cleaners
• Wax polish
do this: To remove dust, wipe with a moist, soft cloth.
do this: To remove deposits from the case, first disconnect the power cable then spray
very lightly with a proprietary glass cleaner containing ammonia and wipe off
gently with a soft cloth, taking care to avoid scratches. Do not spray the cleaner
onto the connectors or the rear panel.
To Next Page
Loading...
