43
Make sure to turn it off before disassembly. Risk of electric shock.
PART NAME DESCRIPTION FIGURE
FREEZER
DOOR
⑦
Disassemble the circled
fixing screw for Water Line.
⑧
Push the inner coupling
using one hand and pull
out Water Line from the
coupling using the other
hand.
⑨ Disassemble clamp
and pipe for protecting
Water Line after
disassembling circled 2
screws, push the upper
Hinge in figure 10 to pull
out wires.
⑩ At least 2 people need
to disassemble the
Freezer Door because
there is a risk tipped-
over so, one man pull to
out the door by lifting up
and the other man push
the Water Line through
lower Hinge.
※ Be careful not to hurt
wires and Water Line.
DOOR UPPER
CHASSIS AT
FREEZER
① Disassemble the circled
8 screws and pull out.
※ Freezer lower Chassis :
Disassemble 5 screws
same as Upper Chassis.
FRIDGE DOOR
① Disassemble Cover Grill,
disassemble the fixing
Clamp and Grounding
wire.
② Disassemble the circled
3 blots(Ø 10mm).
※ Refer to the FREEZER
DOOR disassembly
7
8
9
10
1
1
2
BRANDSOURCE-SM(EN) 2007.1.23 10:31 AM 페이지43
To Next Page
Loading...
