DCS WO-227SS - Element Replacement; Convection Element

To Next Page

To Previous Page

Element Replacement

CONVECTION ELEMENT

STEP 1

Remove oven door. Remove the four (4) screws securing the convection baffle to the oven liner

(fig.24).

STEP 2

Remove the two (2) screws securing the element to the liner (figs.25 & 26). Pull element forward to

reveal terminals. With a pair of pliers disconnect the wires from the element. The element can now be

replaced (fig.27).

FIG.24

FIG.25

FIG.26

FIG.27

Other manuals for DCS WO-227SS