DeFelsko PosiTector SST User Manual

11
Select a previously created batch name to open and make current. If it contains measurements,
on-screen statistics will immediately reflect values calculated from this batch. The calibration
setting (i.e. Cal 2) associated with this batch is also opened.
Stops the recording process, closes the current batch and removes the statistics from the
display.
Remove a batch completely from memory. The name is deleted and all measurements are
erased.
Scroll using the Up or Down buttons through information, statistical summary, and a list of each
reading in the currently opened batch. Press to exit.
Create meaningful batch names and enter notes directly on the Gage using a familiar
onscreen QWERTY keyboard. Use the Gage’s navigation and (-)(+) buttons to enter
annotations. Annotations can be synchronized with PosiSoft.net and are included in
PosiSoft USB Drive reports.
Sends a statistical summary and individual measurements to the optional Bluetooth wireless
printer. (Advanced models only)
NOTE: To cancel printing, press and hold the (-) and (+) buttons simultaneously.
(appears only if a batch is currently open)
The default display mode shows a statistical summary. Press the Up navigation button to display
other modes:
•
Chart : Displays a live graph of measurements data
•
Notes : Displays a batch note (see Annotate, pg. 11)
•
None :default screen showing statistics information when a batch is open
Displays a summary of all stored batches including the name, probe type, number of readings
and type.
Open
Close
Delete
View
Annotate
Print
Display
Batch Summary

DeFelsko PosiTector SST Specifications

General

Brand	DeFelsko
Model	PosiTector SST
Category	Measuring Instruments
Language	English