Determine if a software update is available for your Gage. See www.defelsko.com/update
To perform an update the Gage must be connected to an internet connected PC with PosiSoft
Desktop Manager (pg. 12) or WiFi network.
WARNING: Ensure that stored measurements are backed up to a PC or PosiSoft.net.
The Gage will perform a Hard Reset (pg. 8) after an update. All stored measurements will be
erased from memory.
Do Not disconnect the Gage during the update operation.
batteries. For best battery indicator results, ensure the appropriate Battery Type is selected in
the Setup > Battery Type menu.
The battery indicator displays a full bar with fresh alkaline or fully charged batteries
installed. As the batteries weaken, the bar will be reduced. When the battery symbol is low the
instrument can still be used, but the batteries should be charged or recharged at the earliest
opportunity. The instrument will turn off automatically when batteries are very low, preceded by a
Low Battery Warning on the display.
To retain all user settings and stored memory readings, only replace the batteries after the
instrument has powered-down. Battery performance decreases at low temperatures.
Rechargeable Batteries:
DeFelsko recommends the use of eneloop (NiMH) rechargeable batteries. They combine the
advantages of rechargeable batteries and disposable (Alkaline) batteries. They discharge very slowly
and can be stored for long periods without having self discharge concerns. (See www.eneloop.info)
To Next Page
Loading...
