D E H L E R 3 4
1.2.2. Seawater
Seawater is used for two circuits:
• for the engine system (refer to section 1.7.4)
• for flushing the toilet
The seacocks must be shut after use!
Clean seawater free of impurities is necessary for the faultless operation of the systems.
Therefore, check the seawater filter on a regular basis, and clean or replace the filter pads if
necessary.
Ensure that the filter lids are proper fastened and that the hose
clamps are proper fixed, otherwise there is a risk of water
penetration.
1.2.3. Grey water
Grey water designates all sewages from the sink, wash basin and shower.
The grey water from the sink and from the wash basin goes standardly directly out. The grey
water from the shower is carried by a pump directly out.
oulet sink
To Next Page
Loading...
