D E H L E R 3 4
1.11. Corrosion protection, painting system
Only high quality materials were used. They are largely non-corrosive.
The maritime climate is very aggressive. In result of this the forming of film of rust can appear,
particularly in the vicinity of corrosive metal pieces. With suitable cleaning agent it is possible to
remove the corrosion.
Please take care that the components and fittings made of aluminium alloys as well as corrosion-
resistant and acid-resistant steels (stainless steel) are not permanently in contact with other
metals.
The wooden parts do not require special protection. Section 4 describes how to care for them.
The hull below the waterline shall be protected with special painting to prevent the danger of
marine fouling.
1.12. Manuals and operating instructions
Depending on the contract specifications, manuals, operating instructions etc. can be included.
To Next Page
Loading...
