D E H L E R 3 4
4. Maintenance
Advice for the initial operation:
• Volvo pre delivery inspection by a Volvo Penta dealer
• Read the instructions supplied for each component
• Calibrate all electronic equipment following the manufacturers recommended procedure
• Inspect the security of all seacocks and hose clamps
• Check all systems
Advice for first inspection (after 50 hours of sailing):
• Inspect the condition of the sacrificial anode(s)
• Inspect all seacocks and check the security of all hose clamps
• Check the steering system (lock nuts, cable tension,…)
• Check for leaks above and below the waterline
• Check the halyards of chafe marks
• Have the running and standing rigging checked by a competent person.
Advice for regular maintenance:
• The points as listed for first inspection
• Clean the deck surface with fresh water, when cleaning teak deck areas take care to use
a non-abrasive cloth. Should more aggressive cleaning be required then use a soft brush
at 90 degrees to the direction of the wood grain.
• Washdown blocks and winches with fresh water
• Polish stainless steel fittings to maintain their corrosion-resistant properties
• Clean the sprayhood and maindrop with fresh water
• Clean the Rig / Furlex and sails with fresh water
• Check the mast foot and mast collar
• Descale the fresh water system
• Clean the steering system with fresh water
• Check the guardrail tension and condition
• Clean the seals of hatches and windows and treat with suitable maintenance agent
• Check electrical contacts and connections
• Maintain systems and devices by following the manufacturer supplied documentation
The list of recommendations above does not purport to be complete. It is intended as an
overview. For more information see the individual chapters.
To Next Page
Loading...
