Continuous breaker selection
With GB On and MB On configuration
Pulse breaker selection
With GB On, GB Off, MB On and MB Off selection
If the AGC 100 is ordered with option M19, relay 47 will have NO contact.
4.5 Charger alternator connections
The charger alternator can be used as running-feedback in two different ways:
1. Using the D+ terminal connected to terminal 12
2. Using the W terminal connected to the RPM input
Usually only one of these possibilities is used.
AGC 100 installation instructions
4189340752 UK
Wiring
DEIF A/S Page 14 of 28
To Next Page
Loading...
