Delem
V0413, 25
To delete a bend from the program:
Select the number of the bend step that should be deleted.
Press the CLEAR key; the selected bend step will be deleted.
The succeeding bend steps are shifted up.
The first bend cannot be deleted in the programming screen.
4.4.3 Program delete
To delete the program, go to the program selection screen and
delete the program by pressing the CLEAR key.
4.4.4 Absolute Y-axis value programming
To create a bend program without using angular programming,
program 0 for the tool number. The angle parameter will no
longer be available and the plain axis values can be entered.
To Next Page
Loading...