Delem DAC-310 - Page 33

Delem
V1204, 2.22
Parameter 43:
Servo acceleration
Range : 5 - 1275
Unit : msec
Default : 100
Function
This parameter defines the time needed to reach the full speed output.
speed
servo acceleration
t
Parameter 44:
Manual movement low speed
Range : 1 - 99.9
Unit : mm/sec
Default : 1
Function
Speed of the axis, when it is moved in manual mode with the ‘manual move’ function. This is
the low speed value.
Parameter 45:
Manual movement high speed
Range : 1 - 99.9
Unit : mm/sec
Default : 10
Function
Speed of the axis, when it is moved in manual mode with the ‘manual move’ function. This is
the high speed value.