Dell EMC DLm8500 Data Domain - Network Software Ports for DLm Operations

Network software ports needed to support DLm operations
This section describes about requirement of network software ports to support DLm
operations.
DLm software uses many protocols and standard network ports to support various
monitoring and configuration services. If your network configuration requires that
firewalls exist between DLm systems, ensure that the networking environment into
which you introduce DLm systems provides access to these networking ports and
protocols. Common uses for these network ports are for access:
l
Between the DLm and the SRS gateways
l
To user interfaces such as:
n
DLm Console
n
Data Domain system manager
The following table provides a list of required network software ports and protocols,
along with indications as to what services use them.
Table 2 Required Network Ports for DLm Operations
Port
Number
Port Type Protocol(s
)
Traffic User Direction of
Traffic
Notes
20 TCP FTP Data Outbound To/From SRS
21 TCP FTP Command/
Control
Inbound/
Outbound
To/From SRS
22 TCP SSH/SCP Secure Shell/
Secure Copy
Inbound/
Outbound
To/From SRS
25 TCP SMTP E-mail Outbound Data Domain
and
ConnectEMC
53 UDP DNS BIND/Domain
Name Service
Outbound N/A
80 TCP HTTP Web Server Inbound/
Outbound
Redirects to
443 (secure
HTTP)
123 UDP NTP Network Time
Service
Outbound N/A
161 UDP SNMP Receiver of
SNMP Traps
Outbound N/A
162 UDP SNMPTRAP Sender of
SNMP Traps
Outbound N/A
389 TCP/UDP LDAP Lightweight
Directory
Access
Inbound/
Outbound
User
interfaces
443 TCP HTTPS Web
interfaces
Inbound/
Outbound
User
interfaces
Configuration and host connectivity
16 Disk Library for mainframe Physical Planning Guide for DLm8500