Dell EMC DLm8500 Data Domain - Power Distribution Cabling - Dlm8500; Dlm8500 Multiple Rack Solution for Powermax Power Consumption and Heat Dissipation

Figure 8 Power distribution cabling — DLm8500
Power and cooling data
This section provides an overview of power and cooling data.
The following table provides total power consumption and heat dissipation values for
DLm8500 Multiple Rack Solution for PowerMax systems (which contain a maximum of
eight VTEs, two 16 Gb Fibre Channel data switches, two 10 GbE data switches, and
two 1 GbE management switches):
Table 17
DLm8500 Multiple Rack Solution for PowerMax power consumption and heat
dissipation
System configuration
description
a
Total power
consumption
Heat dissipation
(Btu/Hr)
VTEC cabinet 4.08 kVA 13,050
PowerMax cabinets 3.47 KVA 10,800
Refer to the Dell EMC PowerMax Family Site Planning
Guide for information about the PowerMax cabinets.
a.
All VTEC cabinet values are calculated for a fully loaded configuration. Contact your Dell
EMC Sales Representative for specific supported configurations.
DLm8500 with PowerMax Physical Planning
Disk Library for mainframe Physical Planning Guide for DLm8500 39