l
PowerMax storage cabinet—The
Dell EMC PowerMax Family Site Planning Guide -
PowerMax 2000 and PowerMax 8000
provides the accurate weight.
l
PowerMax system cabinet—The
Dell EMC PowerMax Family Site Planning Guide -
PowerMax 2000 and PowerMax 8000
provides the accurate weight.
DLm physical specification for single cabinet
This section describes about physical specification for single cabinet.
Table 14 on page 37 lists the physical specifications of the VTEC cabinet. The
Dell
EMC PowerMax Family Site Planning Guide - PowerMax 2000 and PowerMax 8000
provides the specifications for the PowerMax cabinet.
The following table lists the physical specification of the VTEC cabinet:
Table 14 Physical specification of the VTEC cabinet
Description Measurements
Height 76.66 in (194.7 cm)
a
Width 24.02 in (61.0 cm)
Depth 41.88 in (106.4 cm)
Clearance for service and airflow
Front 42 in (106.7 cm)
Rear 42 in (106.7 cm)
Top 18 in (45.7 cm)
a.
With trim kit (optional) attached.
External network requirements in DLm8500
This section provides an overview of the requirements of external network for
DLm8500.
The preferred mechanism for callinghome and remote access is to use Ethernet
network connections and ConnectEMC/SRS.
The following table lists the external customer network requirements for DLm8500:
Table 15
DLm8500 external network requirements
DLm8500 1 GbE cables
(Copper)
VTE1 (Management) 1
VTE2 (Management) 1
Note: Refer to the
Dell EMC PowerMax Family Site Planning Guide
for information
about the PowerMax cabinet.
DLm8500 with PowerMax Physical Planning
Disk Library for mainframe Physical Planning Guide for DLm8500 37
To Next Page
Loading...
