System product type approval Specification
EN55022 Class A
CISPR Class A
Radiated emissions limit levels CFR47 Part 15B Class A
EN55022 Class A
CISPR Class A
Harmonics and flicker EN61000-3-2/3
Immunity limit levels EN55024
AC power cable specifications
1. United States of America – Must be NRTL Listed (National Recognized Test Laboratory – e.g., UL):
Chassis form factor 2U12/2U24 5U84
Cable type SV or SVT, 18 AWG minimum, 3 conductor,
2.0M max length
SJT or SVT, 12 AWG minimum, 3
conductor
Plug (AC source) NEMA 5–15P grounding-type attachment
plug rated 120V 10A
or
IEC 320, C-14, 250V, 10A
IEC 320, C-20, 250V, 20A
or
A suitable plug rated 250V, 20A
Socket IEC 320, C-13, 250V, 10A IEC 320, C-19, 250V, 20A
2. Europe and others – General requirements:
Chassis form factor
2U12/2U24 5U84
Cable type Harmonized, H05-WF-3G1.0 Harmonized, H05-WF-3G2.5
Plug (AC source) IEC 320, C-20, 250V, 16A
or
A suitable plug rated 250V, 16A
Socket IEC 320, C-13, 250V, 10A IEC 320, C-19, 250V, 16A
NOTE: The plug and the complete power cable assembly must meet the standards appropriate to the country, and must
have safety approvals acceptable in that country.
Recycling of Waste Electrical and Electronic
Equipment (WEEE)
At the end of the product’s life, all scrap/waste electrical and electronic equipment should be recycled in accordance with national
regulations applicable to the handling of hazardous/toxic electrical and electronic waste materials.
Contact your supplier for a copy of the Recycling Procedures applicable to your country.
NOTE:
Observe all applicable safety precautions detailed in the preceding chapters (weight restrictions, handling
batteries and lasers, and so on) when dismantling and disposing of this equipment.
Standards and regulations 143
To Previous Page
Loading...
