Dell EMC Unity Series Installation Guide

After you finish
In a web browser, access Unisphere by specifying the URL: http://<ip_address>/.
Where, <ip_address> is the IP address you set for the storage system.
Note
Refer to the Configuration Worksheet for information on the user credentials you must
use the first time you log on.
The Initial Configuration Wizard launches the first time you access Unisphere. Refer to
the Configuration Worksheet and Unisphere Online Help for more information on
configuring and start using your system.
Post-requisites
Upgrade the system
Ensure that you upgrade the system to the latest operating environment, and update
the drive firmware. For more information, see the Upgrading Unity Software guide.
Update the install base records
Install base registration occurs when you download and install the license file. For
more information, see the Unisphere Online Help .
Set up a management interface connection
38 Unity 300/300F, Unity 350F, Unity 380/380F, Unity 400/400F, Unity 450F, Unity 500/500F, Unity 600/600F
and Unity 650F Installation Guide

Dell EMC Unity Series Specifications

General

Snapshot Support	Yes
Storage Type	Hybrid Flash, All-Flash
Drive Support	SAS, SSD
Protocols	iSCSI, NFS, SMB
Data Services	Snapshots, Replication, Thin Provisioning, Deduplication, Compression
Management	Unisphere, REST API, CLI
Data Reduction Features	Deduplication, Compression
High Availability	Redundant components
Redundancy	power supplies, fans
RAID Levels Supported	RAID 5, RAID 6, RAID 10
Replication Support	Yes
Cloud Tiering	Yes
Security Features	Encryption at rest, secure erase, role-based access control
Model	Dell EMC Unity Series