Dell EMC Unity Series Installation Guide

CHAPTER 8
Cable and power up your DAE components
Use this section to cable your storage system to optional DAEs and to connect the
DAE components to redundant power sources.
l
Cabling the DPE to a DAE.................................................................................. 54
l
Cabling an expansion DAE to an existing DAE to extend a back-end bus............62
l
Connecting power to the DAE............................................................................65
Cable and power up your DAE components 53

Dell EMC Unity Series Specifications

General

Snapshot Support	Yes
Storage Type	Hybrid Flash, All-Flash
Drive Support	SAS, SSD
Protocols	iSCSI, NFS, SMB
Data Services	Snapshots, Replication, Thin Provisioning, Deduplication, Compression
Management	Unisphere, REST API, CLI
Data Reduction Features	Deduplication, Compression
High Availability	Redundant components
Redundancy	power supplies, fans
RAID Levels Supported	RAID 5, RAID 6, RAID 10
Replication Support	Yes
Cloud Tiering	Yes
Security Features	Encryption at rest, secure erase, role-based access control
Model	Dell EMC Unity Series