Dell EMC Unity Series Installation Guide

Install the disk array enclosure....................................................................44
Install 15-drive DAE........................................................................44
Install 25-drive DAE....................................................................... 47
Cable and power up your DAE components 53
Cabling the DPE to a DAE...........................................................................54
Cabling the first optional DAE to create back-end bus 1................ 55
Cabling the second optional DAE to extend back-end bus 0.......... 57
Cabling the DPE SAS module ports to create back-end buses 2
through 5.......................................................................................58
Cabling an expansion DAE to an existing DAE to extend a back-end bus.... 62
Connecting power to the DAE.................................................................... 65
Configuration Worksheet 67
Configuration worksheet............................................................................ 68
Chapter 8
Appendix A
CONTENTS
4 Unity 300/300F, Unity 350F, Unity 380/380F, Unity 400/400F, Unity 450F, Unity 500/500F, Unity 600/600F
and Unity 650F Installation Guide

Dell EMC Unity Series Specifications

General

Snapshot Support	Yes
Storage Type	Hybrid Flash, All-Flash
Drive Support	SAS, SSD
Protocols	iSCSI, NFS, SMB
Data Services	Snapshots, Replication, Thin Provisioning, Deduplication, Compression
Management	Unisphere, REST API, CLI
Data Reduction Features	Deduplication, Compression
High Availability	Redundant components
Redundancy	power supplies, fans
RAID Levels Supported	RAID 5, RAID 6, RAID 10
Replication Support	Yes
Cloud Tiering	Yes
Security Features	Encryption at rest, secure erase, role-based access control
Model	Dell EMC Unity Series