Table 29. System setup options—Integrated Devices menu(continued)
Integrated Devices
By default, Enable Fingerprint Reader Device is selected.
Table 30. System setup options—Storage menu
Storage
Storage Interface
Port Enablement Selects the onboard drives to enable.
Drive Information Displays the information of various onboard drives.
M.2 PCIe SSD
Type Displays the M.2 PCIe SSD type information of the system.
Device Displays the M.2 PCIe SSD device information of the system.
Table 31. System setup options—Power menu
Power
Lid Switch
Enable Lid Switch Enables or disables the lid switch.
Default: ON
Table 32. System setup options—Security menu
Security
Absolute® Absolute Software provides various cyber security solutions, some requiring
software preloaded on Dell computers and integrated into the BIOS. To use
these features, you must enable the Absolute BIOS setting and contact
Absolute for configuration and activation.
By default, the Enable Absolute option is enabled.
For additional security, Dell Technologies recommends keeping the Absolute
option enabled.
NOTE: When the Absolute features are activated, the Absolute integration
cannot be disabled from the BIOS setup screen.
Table 33. System setup options—Passwords menu
Passwords
Admin Password Enables the user to set, change, or delete the administrator (admin) password.
The admin password enables several security features
System Password Enables the user to set, change, or delete the system password.
M.2 PCIe SSD-0 Enables the user to set, change, or delete the password for the internal
storage.
Table 34. System setup options—Update,Recovery menu
Update,Recovery
SupportAssist OS Recovery Enables or disables the boot flow for SupportAssist OS Recovery tool, in the
event of certain system error.
Default: ON
BIOSConnect Enables or disables cloud Service OS recovery if the main OS fails to boot
within the number of failures equal or greater than the value specified by
86 BIOS Setup
To Next Page
Loading...
