l When prompted to enter a letter, press the appropriate button until the correct letter appears on the display.
For example, to enter the letter O, press 6.
¡ Each time you press 6, the display shows a different letter, M, N, O and finally 6.
¡ To enter additional letters, repeat the first step.
¡ Press when you are finished.
Keypad Letters and Numbers
Changing Numbers or Names
If you make a mistake while entering a number or name, press to delete the last digit or character. Then enter the correct number or character.
Inserting a Pause
For some telephone systems, it is necessary to dial an access code and listen for a second dial tone. A pause must be entered in order for the access code to
function. For example, enter the access code 9 and then press before entering the telephone number. "-" appears on the display to indicate when a pause
is entered.
Setting the Time and Date
To set the time and date:
1. Press until >SETUP appears, and then press .
2. Press until >Admin Menu appears, and then press .
3. Press until >System Settings appears, and then press .
4. Press until >Clock Settings appears, and then press .
To Next Page
Loading...
