SSF Paper Type
Purpose:
To specify the default paper type of the single sheet feeder.
Values:
Reduce/Enlarge
Purpose:
To reduce or enlarge the size of a copied image.
Values:
Original Type
Purpose:
To improve the image quality by selecting the type of the original document.
*
1
Denotes country-specific factory default values.
NOTE: SSF Paper Size is displayed only when print media is inserted in the single sheet feeder.
NOTE: SSF Paper Type is displayed only when print media is inserted in the single sheet feeder.
Stmt® Ltr (129%)*1/A5® B5 (122%)*2
Stmt® Lgl (154%)*1/A5® A4 (141%)*2
Ldgr® Ltr (64%)*1/A4®A5 (70%)*2
Lgl® Ltr (78%)*1/B5®A5 (81%)*2
*
1
These options are displayed when SETUP ® Admin Menu ® System Settings ® mm/inch is set to inch.
*
2
These options are displayed when SETUP ® Admin Menu ® System Settings ® mm/inch is set to mm.
NOTE: You can set the value in a percentage for Custom.