3. Press until Select Tray appears, and then press .
4. Press to select the desired settings, and then press .
5. Press to begin copying.
SSF Paper Size
You can select the default paper size of the single sheet feeder.
1. Load the document to be copied on the document glass, and close the cover.
2. Press until >COPY appears, and then press .
3. Press until Select Tray appears, and then press .
4. Press to select SSF, and then press .
SSF Paper Size is displayed.
5. Press to select the desired settings, and then press .
6. Press to begin copying.
SSF Paper Type
You can select the default paper type of the single sheet feeder.
1. Load the document to be copied on the document glass, and close the cover.
2. Press until >COPY appears, and then press .
3. Press until Select Tray appears, and then press .
4. Press to select SSF, and then press .
SSF Paper Size is displayed.
5. Press to select the desired settings, and then press .
SSF Paper Type is displayed.
To Next Page
Loading...
