Dell 2135cn - Multifunction Color Laser Printer - Page 84

6. Press to select the desired settings, and then press .

7. Press to begin copying.

Reduce/Enlarge
You can reduce or enlarge the size of a copied image, from 25 percent to 400 percent when you copy original documents from the document glass or ADF.
To select from the predefined copy sizes:

1. Load the document to be copied on the document glass, and close the cover.

2. Press until >COPY appears, and then press .

3. Press until Reduce/Enlarge appears.

4. Press to select the desired settings, and then press .

5. Press to begin copying.

Original Type
The Original Type setting is used to improve the image quality by selecting the document type for the current copy job.
To select the image quality:

1. Load the document to be copied on the document glass, and close the cover.
Plain*
Plain Thick
Covers
Covers Thick
Label
Coated
Coated Thick
Recycled
Envelope
Plain S2
Plain Thick S2
Covers S2
Covers Thick S2
Coated S2
Recycled S2
NOTE: When you make a reduced copy, black lines may appear at the bottom of your copy.
100%*
Stmt® Ltr (129%)*1/A5® B5 (122%)*2
Stmt® Lgl (154%)*1/A5® A4 (141%)*2
200%
Custom 100%
50%
Ldgr® Ltr (64%)*1/A4® A5 (70%)*2
Lgl® Ltr (78%)*1/B5® A5 (81%)*2
*
1
These options are displayed when SETUP ® Admin Menu ® System Settings ® mm/inch is set to inch.
*
2
These options are displayed when SETUP ® Admin Menu ® System Settings ® mm/inch is set to mm.
NOTE: You can set the value in a percent for Custom.