2. To customize the copy settings including the number of copies, copy size, contrast, and image quality, see "Setting Copy Options".
To clear the settings, use .
3. Press .
Setting Copy Options
Set the following options for the current copy job before pressing to make copies.
Number of Copies
You can select the number of copies from 1 to 99.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document".
2. Press until >COPY appears, and then press .
3. Press until Number of Copies appears.
4. Press to select the desired settings, and then press .
5. Press to begin copying.
Color
You can select color or black and white copying.
1. Load the document to be copied on the document glass, and close the cover.
2. Press until >COPY appears, and then press .
3. Press until Color appears, and then press .
4. Press to select the desired settings, and then press .
5. Press to begin copying.
Select Tray
You can select the input tray.
1. Load the document to be copied on the document glass, and close the cover.
2. Press until >COPY appears, and then press .
To Next Page
Loading...
