Remote Rcv Tone
Purpose:
To specify the tone in two digits to start Remote Receive.
Fax Header
Purpose:
To print the sender's information on the header of the faxes.
Values:
Fax Header Name
Purpose:
To set the sender's name to be printed on the header on faxes.
Fax Number
Purpose:
To set the fax number of the printer, which will be printed on the header of a fax message.
Fax Cover Page
Purpose:
To set whether to attach a cover page to faxes.
Values:
DRPD Pattern
Purpose:
To provide a separate number for faxing with a distinctive ring pattern.
Values:
Prints the sender's information on the header of faxes.
Does not print the sender's information on the header of faxes.
NOTE: Ensure to specify Fax Number before using Junk Fax Setup.
Does not attach a cover page to faxes.
Attaches a cover page to faxes.
DRPD is a service provided by some telephone companies. DRPD Patterns are specified by your telephone company. The patterns provided with
your printer are shown below:
To Next Page
Loading...
