Dell 2135cn - Multifunction Color Laser Printer - Page 66


Maintenance
Use the Maintenance menu to initialize the NV (non-volatile) memory, configure the plain paper quality adjustment settings, and configure the security settings.

Paper Density
Purpose:
To specify paper density settings.
Values:

Adjust BTR
Purpose:
To specify the transfer roller voltage adjustment for each paper type.
Values:

Adjust Fuser
Purpose:
To adjusts the fuser temperature setting for each paper type.
Values:
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Plain
Light*
Normal
Label
Normal*
Light
NOTICE: The print quality changes depending on the setting values you select for this item.
Plain
0*
-6 - +6
Plain Thick
0*
-6 - +6
Covers
0*
-6 - +6
Covers Thick
0*
-6 - +6
Label
0*
-6 - +6
Coated
0*
-6 - +6
Coated Thick
0*
-6 - +6
Envelope
0*
-6 - +6
NOTICE: The print quality changes depending on the setting values you select for this item.
Plain
0*
-2 - +2
Plain Thick
0*
-2 - +2
Covers
0*
-2 - +2