Dell B3460dn User Manual

Printer is printing solid black pages
Action Yes No
Step 1
a Reinstall the imaging unit.
1 Remove the toner cartridge, and then the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
2 Install the imaging unit, and then the cartridge.
b Resend the print job.
Is the printer printing solid black pages?
Go to step 2. The problem is solved.
Step 2
Replace the imaging unit, and then resend the print job.
Is the printer printing solid black pages?
Contact
technical
support.
The problem is solved.
Transparency print quality is poor
Action Yes No
Step 1
From the printer control panel, set the paper type in the Paper menu to
match the paper loaded in the tray.
Is the paper type for the tray set to Transparency?
Go to step 2. Set the paper type to
Transparency.
Step 2
a Check if you are using a recommended type of transparency.
b Resend the print job.
Is the print quality still poor?
Contact
technical
support.
The problem is solved.
Troubleshooting 148

Dell B3460dn Specifications

General

Print Technology	Monochrome Laser
Monthly Duty Cycle	Up to 150, 000 pages
Standard Connectivity	USB 2.0, Gigabit Ethernet
Duplex Printing	Yes
Processor Speed	800 MHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	1200 x 1200 dpi
Paper Input Capacity	550 sheets
Memory	256 MB
Maximum Paper Size	Legal (8.5 x 14 inches)
Print Speed	Up to 50 ppm (letter)