9. Install the:
a. bezel
b. cover
10. Follow the procedure in After working inside your computer.
WLAN card
Removing the WLAN card
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. cover
b. bezel
3. Open the front panel door.
4. To remove the WLAN card:
a. Loosen the M2.5*6.3 captive screw to release the plastic tab that secures the WLAN card to the computer [1].
b. Remove the plastic tab to access the WLAN cables [2].
c. Disconnect the WLAN cables from the connectors on the WLAN card [3].
d. Lift the WLAN card from the connector on the system board [4].
Installing the WLAN Card
1. Insert the WLAN card to the connector on the system board.
2. Connect the WLAN cables to the connectors on the WLAN card.
3. Place the plastic tab on the WLAN card and tighten the M2.5*6.3 screw to secure the WLAN card to the system board.
4. Close the front panel door.
5. Install the:
a. bezel
b. cover
6. Follow the procedure in After working inside your computer.
14
Disassembly and reassembly
To Next Page
Loading...
